Home » » Simple 3V Power Supply Circuit Diagram For Portable Radios

Simple 3V Power Supply Circuit Diagram For Portable Radios

Written By buang hary on Selasa, 20 Agustus 2013 | 03.57

This is the Simple 3V Power Supply Circuit Diagram For Portable Radios. Most small portable radios require a 3-V supply, which is normally provided by two AA or AAA batteries .Because rechargeable batteries are an option with many of these radios, most of them are fitted with a charger socket. When such radios are used in a stationary condition (e.g., in the kitchen or in the office), it is useful (and economical) to use the mains-operated supply described here. 

The supply is small enough to be fitted inside the radio or in a mains adapter case (less than transformer). Voltage regulator IC1 is adjusted for an output of 3 V by resistors RI and R2, which are decoupled by C2. Capacitor C3 provides additional filtering. Diode D1 indicates whether the unit has been connected to the mains. The diode also provides the load necessary for the regulator to function properly; in its absence, the secondary voltage of the transformer might become too high when the unit is not loaded. 

The transformer should be a short-circuit-proof miniature type, which is rated at 12 V and 4.5 VA. The secondary voltage is slightly higher than needed for a radio, but this reserve is useful when the unit is used with a cassette or CD player. It is advisable to check the output voltage of the unit when it is switched on for the first time before connecting it to a radio or cassette player. 

 3V Power Supply Circuit Diagram For Portable Radios

3V Power Supply Circuit Diagram For Portable Radios

Share this article :

0 komentar:

Posting Komentar

Entri Populer

 
Support : Your Link | Your Link | Your Link
Copyright © 2013. CIRCUIT DIAGRAMS FREE - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger